Solar Lights

All-in-one and vertical solar street lights for off-grid, energy-efficient outdoor deployment.

Back to HansaGreen

Solar Lights

All in One Solar

TECO Solar Street Light All in One Solar

TECO Solar Street Light

All-in-one solar street light with 14-cell panel, smart motion control and 5,600 lm at 140 lm/W.

  • Smart control — motion sensor ON/OFF
  • High-efficiency cells — over 23% cell efficiency
  • Long-lasting battery, zero grid consumption
IP66 IK08 140 lm/W 5,600 lm 18V · 2.2A 10 m pole

Models: TECO-AN1-40 (L1520 × W146, 13.75 kg)

Rural roads · urban roads · residential areas · pedestrian crossings

HansaGreen solar lights cover all-in-one and vertical solar street lights for off-grid, energy-efficient outdoor deployment. Distributed by Alzab Algharbiyah in Saudi Arabia, the range is specified for rural roads, urban roads, residential areas, pedestrian crossings, open car parks, industrial and infrastructure sites and other locations where grid connection is distant, costly or impractical, and where strong year-round sunshine can be used as the energy source.

All-in-one solar street light: solar-teco

The solar-teco all-in-one solar street light integrates the panel, battery, controller and LED head in one body. It carries a 14-cell panel, smart motion control and 5,600 lm output at 140 lm/W, which lets the fixture run a dimmed base level and raise output when movement is detected. That behaviour suits rural roads, urban roads, residential areas and pedestrian crossings, where full output is needed only through the hours of actual use. Because the unit arrives as a single assembly, installation on a new pole needs no trenching back to a distribution board.

Vertical solar pole: solar-tecolux-triangle

The solar-tecolux-triangle 12M takes a different approach, mounting 320 Wp of mono-crystalline panels vertically on the pole. A 25.6 V 30 Ah LiFePO4 battery and an MPPT 15A controller support 12 hours of autonomous operation, and the listed applications are open car parks, industrial and infrastructure sites, residential spaces and off-grid areas. Vertical panels avoid the flat-roof dust accumulation and shading profile of horizontal mounts, which is a practical consideration on exposed sites, and the pole becomes the complete lighting asset rather than a luminaire waiting for a cable.

Choosing between the two solar types

Sizing an off-grid installation starts from the lighting hours required and the autonomy expected through the night. The solar-teco applies smart motion sensing to preserve charge across the evening, lifting output from its base level only when movement is detected, which suits residential roads and pedestrian crossings with intermittent traffic. The vertical solar-tecolux-triangle instead invests in panel area and battery capacity for sustained output over 12 hours, which suits car parks and infrastructure sites that stay in use. For developers and municipalities the practical gain is a lighting asset that needs no feeder cable from a distribution board, shortening civil works on remote road links and open sites.

Off-grid supply support

With 35+ years of trading and more than 500 completed projects across infrastructure and government sectors, Alzab Algharbiyah supplies solar lighting as part of complete outdoor packages, alongside pole schedules and civil provisions. The full lighting category list is on the HansaGreen lighting hub and partner brands are shown on our products page. Grid-connected sections of the same project use road and street lights, while plazas and community areas use urban lights. Contact our team to request a quotation for an off-grid lighting package.